rp8400 and missing processors

[tkaski]

We bought an used HP rp8400 server for HP-UX scalability test usage. When I repartitioned the server to a single partition configuration I lost 2 CPUs. All memory installed on the same cell is still available.
Does anybody have any idea where I could find these missing CPUs?

[Mridul Shrivastava]

Could you please let me know the no. of cell this box has.. Could you please paste the output of the "parstatus -C"

Do you have a icod installed on the box ??

Waiting for your reply...

[Mariusz Grabowski_2]

it might be that although the cpus are physically there, but they're broken and have been deconfigured.

when the npar is booting - go into vfp and monitor the cells when they're booting; search for "E" on the left of the cell. additionally - you can check logs in MP (sl -> show logs) and seek for hw problems.

further - when you run ioscan: how many cpus do you see? and what if you run parstatus? what in stm? what in glance / top? what in syslog.log when system started? does all these sources show the same number of cpus?

rgds, Marisuz

[Victor Makukha]

Hi,

The best way is to use utilities like Partition Manager in SAM and stm from command line. You can alanyze the partition configurations. Sometimes the server disables the processors after the reconfigurations. You should be able to see those "disabled" processors using those tools. In order to understand the reason enter the MP and view the MP logs that correstpond to the processor tests/activation.

Regards,

[tkaski]

Ioscan does not show the missing ones. However I think that parstatus -C shows them, however they are not there as deconfigured.

They could be Icod CPUs, however if I run icod_stat, I cannot see them.

Some cut and paste:

# ioscan -fnkC processor
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
processor 0 0/10 processor CLAIMED PROCESSOR Processor
processor 1 0/11 processor CLAIMED PROCESSOR Processor
processor 2 0/12 processor CLAIMED PROCESSOR Processor
processor 3 0/13 processor CLAIMED PROCESSOR Processor
processor 4 1/10 processor CLAIMED PROCESSOR Processor
processor 5 1/11 processor CLAIMED PROCESSOR Processor
# parstatus -C


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Base 4/0/4 4.0/0.0 cab0,bay0,chassis0 yes yes 1
cab0,cell1 Active Core 2/0/4 4.0/0.0 cab0,bay0,chassis1 yes yes 1
cab0,cell2 Absent - - - - - -
cab0,cell3 Absent - - - - - -

Notes: * = Cell has no interleaved memory.
#

# icod_stat
.
.
.
Allocation of Instant Capacity Resources among the nPartitions
--------------------------------------------------------------
Intended Actual
nPar Total Active Active =======Inactive======= Runs
ID Cores Cores Cores Cores Memory Cells iCAP nPar Name
==== ===== ======== ====== ====================== ==== ======================
1 6 0 6 0 0.0 GB 0 Yes part1 (local)
N/A 0 N/A N/A N/A 0.0 GB 0 N/A Unassigned Cells

[Mridul Shrivastava]

Hi,

You have all the CPUs on the box but while creating the partition you have not added the cell board 1 that is the reason you are not able to see those 2 CPUs.

ypu have to execute parmodify command and then add the cell board 1 as well in the current partition and then reboot the server.
I hope this will resolve the issue.

[Mridul Shrivastava]

Sorry for the last reply....

there are only 6 CPUs installed on your ssytem..

Parstatus output shows that cell board 1 has only 2 CPUs, however it is capable of 4 CPUs.

So physically only 6 CPUs are present...

[tkaski]

Both cells are fully configured (I looked inside the case). However, there are some errors in the SL log which have something to do with CPUs, so there might be a HW failure.
I'll need to consult the previous owner.

Anyway, thanks for all the responses.