HPE Community
Operating System - HP-UX
1752800 Members
5461 Online
108789 Solutions
New Discussion юеВ

Re: rx2660 with HPUX running Service Guard using MSA30 MI

 
will68
Contributor

тАО12-12-2008 03:11 AM

тАО12-12-2008 03:11 AM

rx2660 with HPUX running Service Guard using MSA30 MI

is the above supported?
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО12-12-2008 03:55 AM

тАО12-12-2008 03:55 AM

Re: rx2660 with HPUX running Service Guard using MSA30 MI

I'm sure it is - the MSA30 MI is made for this.



Just make sure you adjust 1 servers HBA to SCSI ID 6 on each bus!!!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Emil Velez
Honored Contributor

тАО12-12-2008 09:08 PM

тАО12-12-2008 09:08 PM

Re: rx2660 with HPUX running Service Guard using MSA30 MI

Serviceguard is storage agnostic. The shared disks can be scsi jbod, scsi disk array or fibrechannel disk arrays of many types and vendors. The MSA is well supported on HPUX systems and Serviceguard.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.