HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

rx2660 with HPUX running Service Guard using MSA30 MI

 
will68
Contributor

rx2660 with HPUX running Service Guard using MSA30 MI

is the above supported?
2 REPLIES
Torsten.
Acclaimed Contributor

Re: rx2660 with HPUX running Service Guard using MSA30 MI

I'm sure it is - the MSA30 MI is made for this.



Just make sure you adjust 1 servers HBA to SCSI ID 6 on each bus!!!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Emil Velez
Honored Contributor

Re: rx2660 with HPUX running Service Guard using MSA30 MI

Serviceguard is storage agnostic. The shared disks can be scsi jbod, scsi disk array or fibrechannel disk arrays of many types and vendors. The MSA is well supported on HPUX systems and Serviceguard.