cancel
Showing results for 
Search instead for 
Did you mean: 

rx4610 CDE Login

Rohit_10
Occasional Contributor

rx4610 CDE Login

I am installing IA64 server model rx4610 with HP-UX 11i 1.5 ver. The sever is having VGA card and PS/2 Mose and Keyboard ports. I have connected 17" color monitor and HP Mouse and Keyboard to the server. After booting I cannot get CDE login on console. I tried running /usr/dt/bin/dtlogin command but it returns no errors and I get back to # prompt. The network configuration is proper. Also the CDE environment is installed on the system. Is CDE supported on this server ?
5 REPLIES
Duncan Edmonstone
Honored Contributor

Re: rx4610 CDE Login

Try running the CDE diagnosis tool:

/usr/contrib/bin/X11/dr_dt

This may flag up some errors with your configuration.

HTH

Duncan

HTH

Duncan
Rohit_10
Occasional Contributor

Re: rx4610 CDE Login

I have tried this command. It showed only few warnings which were related to file permissions. But no errors were reported. Also this system has come preinstalled with OS.
Duncan Edmonstone
Honored Contributor

Re: rx4610 CDE Login

This thread has some useful pointers for these kind of problems....

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x87f6660142b2d5118ff10090279cd0f9,00.html

Search string to dind this was "dr_dt"

Particularly look to see if you have anything in /.dt/errorlog or /var/dt/Xerrors

HTH

Duncan

HTH

Duncan
Rohit_10
Occasional Contributor

Re: rx4610 CDE Login

I am getting the CDE login on X teminal on my pc. But still I cant get the CDE login on my Console. Rest all configuration is ok as per document.
Arockiasamy K
Frequent Advisor

Re: rx4610 CDE Login

Try switching the run levels from 3 to 4 and 4 to 3.

 

init 4

Regards,
Arockiasamy K