cancel
Showing results for 
Search instead for 
Did you mean: 

sautil and saconfig

 
SOLVED
Go to solution
EU-Admins-UNIX
Regular Advisor

sautil and saconfig

Hi All

 

I have an RP7420 running 11.31 attached to an MSA30, and I can sautil and saconfig the /dev/ciss0 device.

 

ba 4 0/0/6 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
slot 3 0/0/6/1 pci_slot CLAIMED SLOT PCI Slot
ba 5 0/0/6/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ext_bus 0 0/0/6/1/0/4/0 ciss CLAIMED INTERFACE PCI-X SmartArray 6402 RAID Controller
/dev/ciss0
target 0 0/0/6/1/0/4/0.0 tgt CLAIMED DEVICE
disk 16 0/0/6/1/0/4/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
disk 18 0/0/6/1/0/4/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 23 0/0/6/1/0/4/0.0.2 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d2 /dev/rdsk/c0t0d2
disk 24 0/0/6/1/0/4/0.0.3 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d3 /dev/rdsk/c0t0d3

 

I also have an 8420 running 11.31 attached to an MSA1000, but i cannot saconfig or sautil.  It doesn't have the /dev/cissx device file.

 

ba 6 0/0/10 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (783)
slot 5 0/0/10/1 pci_slot CLAIMED SLOT PCI Slot
fc 0 0/0/10/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fcp 0 0/0/10/1/0.8 fcp CLAIMED INTERFACE FCP Protocol Adapter
ext_bus 4 0/0/10/1/0.8.0.124.0 fcparray CLAIMED INTERFACE FCP Array Interface
target 1 0/0/10/1/0.8.0.124.0.0 tgt CLAIMED DEVICE
ctl 1 0/0/10/1/0.8.0.124.0.0.0 sctl CLAIMED DEVICE COMPAQ MSA1000
/dev/rscsi/c4t0d0
disk 7 0/0/10/1/0.8.0.124.0.0.2 sdisk CLAIMED DEVICE COMPAQ MSA1000 VOLUME
/dev/dsk/c4t0d2 /dev/rdsk/c4t0d2
disk 9 0/0/10/1/0.8.0.124.0.0.3 sdisk CLAIMED DEVICE COMPAQ MSA1000 VOLUME
/dev/dsk/c4t0d3 /dev/rdsk/c4t0d3
disk 10 0/0/10/1/0.8.0.124.0.0.4 sdisk CLAIMED DEVICE COMPAQ MSA1000 VOLUME
/dev/dsk/c4t0d4 /dev/rdsk/c4t0d4
disk 11 0/0/10/1/0.8.0.124.0.0.5 sdisk CLAIMED DEVICE COMPAQ MSA1000 VOLUME
/dev/dsk/c4t0d5 /dev/rdsk/c4t0d5

 

Any idea?  Is there a driver or some software I should install?

 

Regards

 

Tariq

3 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: sautil and saconfig

This is pretty normal.

The SA6400 controller is in your server, hence you can use saconfig/sautil.

The MSA1000 is an array with the controllers inside, so you can only use the serial CLI of the array to configure.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
EU-Admins-UNIX
Regular Advisor

Re: sautil and saconfig

Torsten.
Acclaimed Contributor

Re: sautil and saconfig

Please tell there if you can see the additional space in the array now?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!