Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

shl_load/dlopen failed with err no. 2

Highlighted
ArtemTroitsky
Occasional Advisor

shl_load/dlopen failed with err no. 2

Hi there,

 

Just updated FC-TACHYON driver on two HP 11i v3 PA servers (A and B) with a little difference - on one of them I removed the old version first (A). Now I have the following error messages in A syslog:

 

Dec 17 17:06:06 A syslog: Mon Dec 17 17:06:06 2012 PID = 11587 Line = "com.hp.fcms32 /usr/lib/libhbaapihp.sl" HP SNIA Common - HBA_LoadLibrary: shl_load/dlopen failed with err no. 2
Dec 17 17:37:48 A syslog: Mon Dec 17 17:37:48 2012 PID = 12886 Line = "com.hp.fcms32 /usr/lib/libhbaapihp.sl" HP SNIA Common - HBA_LoadLibrary: shl_load/dlopen failed with err no. 2
Dec 17 18:37:55 A syslog: Mon Dec 17 18:37:55 2012 PID = 14881 Line = "com.hp.fcms32 /usr/lib/libhbaapihp.sl" HP SNIA Common - HBA_LoadLibrary: shl_load/dlopen failed with err no. 2
Dec 17 19:38:00 A syslog: Mon Dec 17 19:38:00 2012 PID = 16789 Line = "com.hp.fcms32 /usr/lib/libhbaapihp.sl" HP SNIA Common - HBA_LoadLibrary: shl_load/dlopen failed with err no. 2

 

Release notes says nothing about such behavior, but FC-COMMON 0903 has following know problem:

 

4. 1 FC-COMMON

∙ Library load fail

On a system where a FCoC type HBA does not exist, the SNIA library reports the following

error message in the syslog.log file:

com.hp.fcoc64 /usr/lib/hpux64/libhbaapifcoc.so HP SNIA Common -

HBA_LoadLibrary: shl_load/dlopen failed with err no. 0

Severity: med

Corrective action: Modify the /etc/hba.conf file to comment out each of the following two

lines:

◦ # com.hp.fcoc32 /usr/lib/hpux32/libhbaapifcoc.so

◦ # com.hp.fcoc64 /usr/lib/hpux64/libhbaapifcoc.so

This modification prevents the SNIA library from loading these libraries.

 

Wonder whether this could be the case. What if system skipped to generic driver when I removed the old one, but didn't shifted to a new one after an update? Any comments or help would be greatly appreciated

 

Thanks in advance