sim/smh NOT detecting hp integrity hp-ux disk hardware failure

[Centric]

We are running HP SIM V6.
On the Hp-UX HP-UX B.11.31 rx2660 the WBEM agents are installed. We see a lot of information.

When we look at the physical system the 3rd disk has the orange led blinking.

The WBEM pages show nothing wrong for disks, the LV's are shown, but we can't find the individual physical disks in the pages. The lan1 without a cable IS showing an error on the SMH and in SIM. So hardware error seems to be working.

What must be done to see the physical disk errors via SIM? Where can we find if there are physical disk errors in HP-UX?

Regards, Marcel

[Shibin_2]

// Have you checked for any EMS alerts in your syslog ?

[Centric]

We did check that before.
No nothing, no ems or disk errors.

[Centric]

Logging a call with hp.