System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

sim/smh NOT detecting hp integrity hp-ux disk hardware failure

 
Centric
Occasional Advisor

sim/smh NOT detecting hp integrity hp-ux disk hardware failure

We are running HP SIM V6.
On the Hp-UX HP-UX B.11.31 rx2660 the WBEM agents are installed. We see a lot of information.

When we look at the physical system the 3rd disk has the orange led blinking.

The WBEM pages show nothing wrong for disks, the LV's are shown, but we can't find the individual physical disks in the pages. The lan1 without a cable IS showing an error on the SMH and in SIM. So hardware error seems to be working.

What must be done to see the physical disk errors via SIM? Where can we find if there are physical disk errors in HP-UX?

Regards, Marcel
3 REPLIES
Shibin_2
Honored Contributor

Re: sim/smh NOT detecting hp integrity hp-ux disk hardware failure

// Have you checked for any EMS alerts in your syslog ?
Regards
Shibin
Centric
Occasional Advisor

Re: sim/smh NOT detecting hp integrity hp-ux disk hardware failure

We did check that before.
No nothing, no ems or disk errors.
Centric
Occasional Advisor

Re: sim/smh NOT detecting hp integrity hp-ux disk hardware failure

Logging a call with hp.