cancel
Showing results for 
Search instead for 
Did you mean: 

snmp community string

Bigbang_1
Frequent Advisor

snmp community string

How to configure snmp string on hp-ux?

Regards.
3 REPLIES
Raj D.
Honored Contributor

Re: snmp community string

Bigbang,

Here you go:

Look at the file :
/etc/snmpd/snmpd.conf
linked to:
/etc/SnmpAgent.d/snmpd.conf


The string mentioned in the line: "get-community-name:" is the community string.

To modify community string you can replace public with any other string, and to restart snmpd daemon.


More:
http://docs.hp.com/en/B9106-90011/snmpd.conf.4.html



* Make sure to assign points when done. Cheers.
Raj.

" If u think u can , If u think u cannot , - You are always Right . "
Bigbang_1
Frequent Advisor

Re: snmp community string

if I configure new community string like "example".and configure trap destination which is destinitaion IP "10.1.8.207" in "snmpd.conf".

will it work?

thanks,regards.

B. Hulst
Trusted Contributor

Re: snmp community string

trap-dest: 10.1.8.207

Note:
you can add more then one trap destination line.