cancel
Showing results for 
Search instead for 
Did you mean: 

stm not functioning.

SOLVED
Go to solution
點燃
Valued Contributor

stm not functioning.

Hi
I'm facing a problem related to stm.
Whenever I'm running the command "map" at the 'cstm>' prompt, it diaplays the following error.

cstm>map
* * * N O C U R R E N T S Y S T E M * * *

Thanks!
Man's mind, once stretched by a new idea, never regains its original dimensions
9 REPLIES
Taifur
Respected Contributor
Solution

Re: stm not functioning.

Hi Pradeesh,

If you facing problem with cstm ,then you can run nickel script, from where you can check all of the information about your system.

#cd /opt/contrib/bin
#ll
#./nickel

Rgds//
Taifur


Torsten.
Acclaimed Contributor

Re: stm not functioning.

You will see no map if the system is scanning.

Just try to stop and start the diags again.

# /sbin/init.d/diagnostics stop

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Vinoyee Madashery Poulo
Frequent Advisor

Re: stm not functioning.

Pradeesh,

Stop and start the diagnostic daemon and wait for some time to regenrate the maping.

/sbin/init.d/diagnostic stop
/sbin/init.d/diagnostic start

點燃
Valued Contributor

Re: stm not functioning.

Hi All,
Thanks for the replies,
I've restarted 'diagnostic' and was able to run 'map' successfully, but when I tried to select a device, I could not do that.
It has come to the cstm prompt suddenly after that.Any suggestions?
Man's mind, once stretched by a new idea, never regains its original dimensions
Torsten.
Acclaimed Contributor

Re: stm not functioning.

Once started, it needs some time to scan.

What version are you running?

Just starting cstm will tell you ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
點燃
Valued Contributor

Re: stm not functioning.

-- Information --
Support Tools Manager


Version A.59.05

Product Number B4708AA
Man's mind, once stretched by a new idea, never regains its original dimensions
Torsten.
Acclaimed Contributor

Re: stm not functioning.

Looks like a currently supported version.

How do you select the device?

Just to check this: Does your name resolution work correctly?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
點燃
Valued Contributor

Re: stm not functioning.

Hi
The daemon '/usr/sbin/stm/uut/bin/sys/diagmond'
is getting started whenever I restart diagnostic, but disappear after a while.
The name resolution works normally.

thanks!
Man's mind, once stretched by a new idea, never regains its original dimensions
點燃
Valued Contributor

Re: stm not functioning.

Closing this thread.
The issue was that, the 'nfiles' parameter had overflown. A reboot did fix the issue.

Thanks for all the help!

cheers,
Pradeesh kumar.
Man's mind, once stretched by a new idea, never regains its original dimensions