subnet query.

[aruns_s]

hi all,

I would like to add a firewall rule to allow port 6543 on my primary lan interface.Which subnet should I mention to network guys to allow this port.
lan903: flags=8000000000001843
inet 10.5.35.132 netmask fffffff0 broadcast 10.5.35.143

[Jeeshan · Accepted solution]

Hi

if you want to one host then no need to define any subnet

but if you want to allow multiple host then you need to define the subnet from accessing addresses.

[Sandman!]

Not sure I understand the question. Are you concerned about the subnet on which the port's open or from which subnets to allow connection requests? lan903 is on subnet 10.5.35.128