cancel
Showing results for 
Search instead for 
Did you mean: 

system hung at PCI BUS SCAN

 
whiteSox
Frequent Advisor

system hung at PCI BUS SCAN

HI ,

Can some one please let me know where to find what the issue with this server is and how to fix that...The system cam up it displayed the following...
Error 8141 Processor in socket M1 failed FRB level 3.
Error 8142 Processor in Socket M2 failed
Error 8132 Processor in Socket M3 failed...But the system still came up how I find what was the issue and where to look for what is the problem...
12 REPLIES
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

This is a rx4610 HP-UX running 11.23 ITANIUM
Torsten.
Acclaimed Contributor

Re: system hung at PCI BUS SCAN

Can you please let us know what server you have?

Somehow I think it isn't one for hp-ux ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

Model rx4610 (itanium) running HP-UX 11.23
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

what command can i run to find out if all the CPU's are online ...
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

sorry it is only running 11.22
Tingli
Esteemed Contributor

Re: system hung at PCI BUS SCAN

I don't think there is 11.22. It can be either 11.23 or 11.i2
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

HP-UX servername B.11.22 U ia64 3822572914 unlimited-user license
Torsten.
Acclaimed Contributor

Re: system hung at PCI BUS SCAN

Yes, it could be 11.22.

The rx4610 is rare and old ...


Does "machinfo" work?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

yes ..But it show only one CPU as the server has 4 How can i bring other three online ..
cnb
Honored Contributor

Re: system hung at PCI BUS SCAN

According to manuals you (re)enable them in BIOS.

You need to look at the SEL and SDR logs to figure out what happened to cause them to go offline in the first place. Some of the low-level utilities are descibed in the links below:

From the User Guide:

"Fault Resilient Booting (FRB) Setup
Fault Resilient Booting (FRB) allows a multiprocessor system to boot in case the bootstrap processo
(BSP) fails.
FRB3 Timeout
FRB3 refers to the level of FRB in which a timer is started at system power up or hard reset. The
BIOS stops this timer in the power-on self test (POST) by asserting the FRB timer halt signal to the
Bus Management Controller (BMC). If the timer is not stopped, the BSP is disabled, the system is
reset and another processor becomes the BSP.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00112381/c00112381.pdf

Service Guide:
See Chapter 5:

http://g4u0420c.houston.hp.com/en/3937/sm_rx4610_01_service_man.pdf


HTH

Re: system hung at PCI BUS SCAN

I assume you know that 11.22 isn't supported?
And wasn't when I asked you that almost 3 years ago.
whiteSox
Frequent Advisor

Re: system hung at PCI BUS SCAN

Thanks for your help ...