tape drive decting problem

[Sandeep Daphal]

i have connect tape drive on hpux 11i
in ioscan output it's show as
10/0/15/0.0.0 unknown HP C1537A

please tell me how to create device file for tape.


thanks

[Torsten.]

You need to include the "stape" driver into the kernel.

[SUDHAKAR_18]

Hi,
Torsten is right, you need to enable the "stape" kernel module to static and it may take a reboot.

[Sandeep Daphal]

how to enable the "stape" kernel module to static

[arakh]

sam-->kernel configuration-->tunable
search for "stape" character

[Sameer Kelkar]

HI...
First run
#kcmodule stape
Will give u output something like
Module State Cause
stape unused

Then give
# kcmodule -h stape=static

-h will hold the changes till next reboot.

[Sandeep Daphal]

thanks for help

[Sameer Kelkar]

Hi,

Please assign some points who give there valuable time for your problem.

To know how to assign points please go through the below link.


http://forums13.itrc.hp.com/service/forums/helptips.do?#33