HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

tftp and HP service guard

 
SOLVED
Go to solution
Indranil Adak_1
Occasional Advisor

tftp and HP service guard

Hello,

Does anyone know how to configure "tftp" to work with a floating IP address.

We have a Solaris box from where we want to transfer some files to an application which is running under HP Service guard on HP-UX 11i v3.
We need to transfer files to a folder where the application is currently running. Therefore, we must ensure that we always transfer file to the floating IP.

tftp works when we set the destination to the node IP address.

[root@]# tftp 172.21.200.122
tftp> put test.txt
Sent 7 bytes in 0.0 seconds
tftp>


tftp times out, whenever we set the destination to the floating IP address.
[root@]# tftp 172.21.200.127
tftp> put test.txt
Transfer timed out.

Additional logs after enabling tftpd -l and inetd -l

Oct 21 10:29:38 actnms02 tftpd[15522]: Available disk space 109436928 bytes
Oct 21 10:29:38 actnms02 tftpd[15522]: receive: WRQ test.txt netascii
Oct 21 10:30:03 actnms02 tftpd[15522]: Transfer timed out

Any help will be greatly appreciated.

Thanks in advance
Indranil
2 REPLIES
Solution

Re: tftp and HP service guard

Did you use the tftpd option "-s" which allows tftpd to work in a SG cluster?

HTH

Duncan

HTH

Duncan
Indranil Adak_1
Occasional Advisor

Re: tftp and HP service guard

Thank you Duncan. I hope you have got the points.