HPE Community
Operating System - HP-UX
1753831 Members
8547 Online
108806 Solutions
New Discussion юеВ

Re: the NIC card name and type

 
niftysw
Occasional Contributor

тАО02-16-2011 09:33 PM

тАО02-16-2011 09:33 PM

the NIC card name and type

Hi there,

Is it possible to get the informaton of the NIC card name and type on HP-UX command?

Best regards,
0 Kudos
Reply
2 REPLIES 2
nijokj
Trusted Contributor

тАО02-16-2011 09:44 PM

тАО02-16-2011 09:44 PM

Re: the NIC card name and type

ioscan -fnC lan will provide you the lan card information and corresponding LBA information.

alternate if cstm working on your server selct the device and check the info log will provide you all lan card information.
0 Kudos
Reply
Ismail Azad
Esteemed Contributor

тАО02-17-2011 04:17 AM

тАО02-17-2011 04:17 AM

Re: the NIC card name and type

Hi,

The "subsystem" and "interface type" would be present in your nwmgr output as well.

Regards
Ismail Azad
Read, read and read... Then read again until you read "between the lines".....
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.