truss command in HP-UX 11i

[ng_7]

Dear Experts

Can please tell me the following solaris command in HP-UX 11i ?

truss -aef -w all -r all -o /tmp/truss.out -p 100

thanks

regards
ng

[Shinji Teragaito_1]

You need to install tusc from

http://hpux.connect.org.uk/hppd/hpux/Sysadmin/tusc-7.9/

All of the parameters you mentioned are the same.

% tusc -aef -w all -r all -o /tmp/tusc.out -p 100

[ng_7]

hi, not able to go to the link, would you mind to upload to this forum for me. thanks

[Venkatesh BL]

Try this: http://h20331.www2.hp.com/hpsub/cache/286022-0-0-225-121.html

The ftp link is: ftp://ftp.hp.com/pub/catia/Utils/tusc7.4.shar

[rick jones]

If all those URLs fail, you can try:

ftp://ftp.cup.hp.com/dist/networking/tools/

[ng_7]

have try to download from ftp://ftp.hp.com/pub/catia/Utils/tusc7.4.shar

and rename tusc7_4_shar.mht to tusc7_4.shar

and I try install and get error as below.

sh tusc7_4.shar
tusc7_4.shar[19]: Syntax error at line 19 : `&' is not expected.

please help to see the uploaded file

thanks

[rick jones]

That URL downloaded and unshared for me just fine. I suspect something is wrong in the download - for example, what gave it that odd addition to the filename... make certain the download is in binary mode not ascii or some other mode.

[Tom Henning]

Looks like when it was downloaded it was translated into HMTL, for example the greater than symbols ('>') were changed into the phrase '>'. Try the download again using a different browser, or at least do not save as html.

[ng_7]

hi, have install the file, and I can see the file being extracted to /home/tmp as shown below. but I still got error
/home/tmp/tusc -aef -w all -r all -o /tmp/truss.out -p 7956
sh: tusc: not found.

what is the problem. the number afer -p is it process id ?

thanks



app:/home/tmp# sh tusc7_4.shar
x - tusc [compressed]
linking - truss
x - tusc.1 [compressed]
x - sstep [compressed]

app:/home/tmp#

-r-xr-xr-x 1 root sys 4900 Oct 13 2002 sstep
lrwxrwxrwx 1 root sys 4 Feb 11 11:45 truss -> tusc

-rwxr-xr-x 1 root sys 987136 Oct 13 2002 tusc
-rw-r--r-- 1 root sys 22518 Oct 13 2002 tusc.1
-rw-r----- 1 root sys 998231 Feb6 tusc7_4.old
-rw-rw-rw 1 root sys 847913 Feb 11 tusc7_4.shar
drwxrwxrwx 4 root sys 1024 Jul 31 2008 zip

[Dennis Handly]

>sh: tusc: not found.

(I'm not sure why that isn't an absolute path?)
What does "file /home/tmp/tusc" show?

>the number after -p is it process id?

There is no relation between -p (print PIDs) and what follows. But it is probably the PID.
See the man page.