trying to install wireshark on an HP-UX 11.11 server

[PamelaJThrasher]

Hello-
I am trying to install wireshare 1.1.1 on an HP-UX 11.11 server. It is not istalling 2 out of the 3 filesets.

Here is the output of the swjob -a log thfl1lba-0187 @ thfl1lba:/ command

======= 05/13/09 10:39:22 EDT BEGIN install AGENT SESSION (pid=13867)
(jobid=thfl1lba-0187)

* Agent session started for user "root@thfl1lba". (pid=13867)

* Beginning Analysis Phase.
* Source:
thfl1lba:/var/tmp/wireshark/wireshark-1.1.1-hppa-11.11.depot
* Target: thfl1lba:/
* Target logfile: thfl1lba:/var/adm/sw/swagent.log
* Reading source for product information.
NOTE: The filesystems in the filesystem table will not be checked
against those currently mounted because the
"mount_all_filesystems" option is set to "false".
* Reading source for file information.
The corequisite "openssl.openssl-SHLIBS" for fileset
"wireshark.wireshark-RUN,r=1.1.1" cannot be successfully
resolved.
ERROR: The dependencies for fileset "wireshark.wireshark-RUN,r=1.1.1"
cannot be resolved (see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
The corequisite "openssl.openssl-SHLIBS" for fileset
"wireshark.wireshark-SHLIBS,r=1.1.1" cannot be successfully
resolved.
ERROR: The dependencies for fileset
"wireshark.wireshark-SHLIBS,r=1.1.1" cannot be resolved (see
previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/usr" is estimated to
increase by 7160 Kbytes.
This will leave 132424 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
increase by 16 Kbytes.
This will leave 403856 Kbytes of available user disk space
after the installation.

* Summary of Analysis Phase:
ERROR: Exclude wireshark.wireshark-RUN,r=1.1.1
ERROR: Exclude wireshark.wireshark-SHLIBS,r=1.1.1
ERROR: 2 of 3 filesets had Errors.
* 1 of 3 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.


* Beginning the Install Execution Phase.
* Filesets: 1
* Files: 10
* Kbytes: 7110
* Installing fileset "wireshark.wireshark-MAN,r=1.1.1" (1 of 1).
* Running install clean command /usr/lbin/sw/install_clean.
NOTE: tlinstall is searching filesystem - please be patient
NOTE: Successfully completed

* Beginning the Configure Execution Phase.

* Summary of Execution Phase:
ERROR: Skipped (in analysis) wireshark.wireshark-RUN,r=1.1.1
ERROR: Skipped (in analysis) wireshark.wireshark-SHLIBS,r=1.1.1
ERROR: 2 of 3 filesets had Errors.
* 1 of 3 filesets had no Errors or Warnings.
ERROR: The Execution Phase had errors. See the above output for
details.


======= 05/13/09 10:39:51 EDT END install AGENT SESSION (pid=13867)
(jobid=thfl1lba-0187)


It looks like it is looking for openssl.openssl-SHLIBS.

There are no filesets for openssl on this server:

[thfl1lba:ROOT]:/tmp # swlist -l fileset openssl
# Initializing...
# Contacting target "thfl1lba"...
ERROR: Software "openssl" was not found on host "thfl1lba:/".

I have been trying to find how to install the filesets for openssl. Is there a depot to download for this?

Thanks in advance for any help.

[cnb · Accepted solution]

Hi Pamela,

Did you try here?

http://software.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=OPENSSL11I

Hope this is what you're looking for.

Rgds,

[PamelaJThrasher]

Thank you. That looks like it should work.

[PamelaJThrasher]

I removed the partial wireshark package that had been installed earlier.

I installed the opensll package and it installed successfully.

I reinstalled the wireshark package and it failed again...for the same reason.

Here is an swlist of the opensll filesets. It does not appear to have the SHLIBS fileset that wireshark requires.

[thfl1lba:ROOT]:/home/root # swlist -l fileset | grep -i openssl
# fips_1_1_2 FIPS-OPENSSL-1.1.2.046 Secure Network Communications Protocol
fips_1_1_2.FIPS-CONF FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Configure File
fips_1_1_2.FIPS-DOC FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Document Files
fips_1_1_2.FIPS-INC FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Header Files
fips_1_1_2.FIPS-LIB FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Library Files
fips_1_1_2.FIPS-MAN FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Manual pages
fips_1_1_2.FIPS-MIS FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Miscellaneous Files
fips_1_1_2.FIPS-RUN FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Executable Files
fips_1_1_2.FIPS-SRC FIPS-OPENSSL-1.1.2.046 FIPS OPENSSL 1.1.2 Source Files
# fips_1_2 FIPS-OPENSSL-1.2.001 Secure Network Communications Protocol
fips_1_2.FIPS-CONF FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Configure File
fips_1_2.FIPS-DOC FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Document Files
fips_1_2.FIPS-INC FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Header Files
fips_1_2.FIPS-LIB FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Library Files
fips_1_2.FIPS-MAN FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Manual pages
fips_1_2.FIPS-MIS FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Miscellaneous Files
fips_1_2.FIPS-RUN FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Executable Files
fips_1_2.FIPS-SRC FIPS-OPENSSL-1.2.001 FIPS OPENSSL 1.2 Source Files
# openssl A.00.09.07m.046 Secure Network Communications Protocol
openssl.OPENSSL-CER A.00.09.07m.046 OpenSSL Certs Files
openssl.OPENSSL-CONF A.00.09.07m.046 OpenSSL Configure File
openssl.OPENSSL-DOC A.00.09.07m.046 OpenSSL Document Files
openssl.OPENSSL-INC A.00.09.07m.046 OpenSSL Header Files
openssl.OPENSSL-LIB A.00.09.07m.046 OpenSSL Library Files
openssl.OPENSSL-MAN A.00.09.07m.046 OpenSSL Manual pages
openssl.OPENSSL-MIS A.00.09.07m.046 OpenSSL Miscellaneous Files
openssl.OPENSSL-PRNG A.00.09.07m.046 OpenSSL Prng Files
openssl.OPENSSL-PVT A.00.09.07m.046 OpenSSL Private Files
openssl.OPENSSL-RUN A.00.09.07m.046 OpenSSL Executable Files
openssl.OPENSSL-SRC A.00.09.07m.046 OpenSSL Source Files


Any thoughts??

[cnb]

Hmmm....similar threads indicate other openssl packages that may have the required files:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1242239826538+28353475&threadId=1154621

I can't confirm this as the older package link is now dead, however newer packages are listed here:

http://hpux.connect.org.uk/hppd/cgi-bin/search?package=on&description=on&term=openssl

hth,

[PamelaJThrasher]

Now that worked.

Previously I have installed one of the 0.9.7 revisions.

This time I installed 0.9.8k of openssl. It does includes SHLIBS.

all the filesets of wireshark are not installed.

Thanks so much for your help.

[PamelaJThrasher]

I had to install version 0.9.8k of openssl which includes SHLIBS.