System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to see storage in hp unix 11.11

kvsheejith
Advisor

unable to see storage in hp unix 11.11

Hi,

I have two hp storage system 2300 which is attached through scsi to my hp RP8400 server. I am able to see my two RAID cards and driver files also.

If i give "ioscan -funCdisk" it is not detecting the HDDs.

Where could be the problem ?
3 REPLIES
Torsten.
Acclaimed Contributor

Re: unable to see storage in hp unix 11.11

Better to ask in hp-ux forum next time.


Please post


# ioscan -fn

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew Rutter
Honored Contributor

Re: unable to see storage in hp unix 11.11

hi,

what are the raid cards you are using?

Are the 2300's connected to these? I guess so.

If that is the case have you configured the raid with the raid utilities? you need to do this first before you can see the luns.

if they are smart array cards you use saconfig and sautil commands to view the disks attached and set them up.

Andy
Khairy
Esteemed Contributor

Re: unable to see storage in hp unix 11.11

what type of raid card you use?

pls post the following output:

# ioscan -funC ext_bus
# ioscan -funC disk

Rgds