1745853 Members
4131 Online
108723 Solutions
New Discussion

Re: update-ux question

 
Prokopets
Respected Contributor

update-ux question

Hi!

   I've updated system with update-ux from local filesystem using "update-ux -s /cdrom HPUX11i-OE" command. first hp-ux dvd iso image was mounted to /cdrom. As i can see, update ran successfully, but now i'm not sure - should i mount second dvd iso and run update-ux once more?

 

Philipp.

5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: update-ux question

Is it a virtual machine or a system that can mount ISOs directly?

 

However, the system expects the second DVD on the same or path/mount point, it will ask you for swap DVD 1 out and DVD 2 in, then it will continue.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Prokopets
Respected Contributor

Re: update-ux question

It's a physical server. I mounted the iso file locally in with mount_cdfs.

It didn't ask me anythig after reboot - system just started as usual after update, without any questions during update.

 

Philipp.

Torsten.
Acclaimed Contributor

Re: update-ux question

So I assume the second DVD was not needed.

Usually you see something like this, if the second disc is needed:

* Software installation of this source (B7994 11.23 Mission Critical OE:
DVD1) is complete.

=======================================================================
USER INTERACTION REQUIRED:

To complete the installation you must now insert the
"B7994 11.23 Mission Critical OE: DVD2" CD.

Once this is done, press the <Return> key to continue:


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Prokopets
Respected Contributor

Re: update-ux question

Can i check somehow if the installation was done completely? Or update-ux is just smart enough and even without -i parameter should tell me if it'll need the second disk?

 

Philipp.

pradeep m
Respected Contributor

Re: update-ux question

you can check the update-ux log file ( /var/adm/sw/update-ux.log) for details about the last installation status. 

Regards,
Pradeep

I am an HP Employee
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details