HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

upgradation to v3

 
SOLVED
Go to solution
satheeshnp
Advisor

upgradation to v3

Hi all,

I am using HP-UX v2 in most of the servers. I need to upgrade to V3. Kindly provide me the documents or steps to upgrade.
Thanks in Advance.
2 REPLIES
Torsten.
Acclaimed Contributor

Re: upgradation to v3

See

http://www.hp.com/go/hpux-core-docs

Most members here will suggest to do a cold install ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Kannandgl_1
Frequent Advisor
Solution

Re: upgradation to v3

Dear Satheesh,

Please check below fourms..

http://h30499.www3.hp.com/t5/General/Updating-from-HP-UX-11-23-to-11-31-rx7640-with-4-vPars/m-p/4603766#M144936


The recommended method is to cold install 11.31 and migrate your applications to it.
>What are the steps in cold backup

Backup or install?
You need to make sure you have backup of all of the non-OS files on your system. That could be separate for Oracle and your other files with DP.

You need to make sure you have licenses for your 11.31 versions of all the software you need.Then you do your cold install from the media. Then restore from your backups, excluding the OS and system files.

Regards
Rajamani