HPE Community
Operating System - HP-UX
1753770 Members
4747 Online
108799 Solutions
New Discussion юеВ

Re: upgrade h/w

 
SOLVED
Go to solution
Torsten.
Acclaimed Contributor

тАО07-14-2010 08:22 PM

тАО07-14-2010 08:22 PM

Re: upgrade h/w

Please open your own thread next time!



You need to reinstall the OS after converting the rp4440 into rx4640.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Dennis Handly
Acclaimed Contributor

тАО07-14-2010 08:37 PM

тАО07-14-2010 08:37 PM

Re: upgrade h/w

>Clay: will I need to reinstall the OS after replacing the CPUs?

Yes.

>Anything else I need to be aware of?

Here is a previous thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=967054
0 Kudos
balaji_vvv
Frequent Advisor

тАО07-15-2010 07:37 AM

тАО07-15-2010 07:37 AM

Re: upgrade h/w

Ignite backup and restore should work. In worst case i can reinstall fromt OS dvd.
I assinged points for Clay answers too.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.