vPar storage migration

[cecco16]

Hi guys,

I need to move my vPars (11.31) from a storage array to a differente one in a different location and we need to use a storage based replica; I'd like to copy a DRD clone instead of the original root vg.  What I thought was like this:

• replicate the volume;
• before the split, reboot the system with no active service (and disable the auto startup of the services) and run the DRD utility to clone (REHOST) the rootvg on a dedicated volume and power off the system;
• split the copy and masking;
• on the target site create the profile for each vPar with network and the storage adapter (NPIV with AVIO driver) on the newly installed VSP;
• start up  the vPars;
• check if all the devices are available to the system;
• check if all the VGs available to the system;
• check the multipathing;
• reconfigure the network interfaces (ip, heartbeat...);
• start the services

Any suggestion?