HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

/var is not mounted

 
SOLVED
Go to solution
mohammad_sa
Occasional Advisor

/var is not mounted

good day all

the main problem with me that the /var i can not mount it becouse the /dev/vg00/lvol8 is corrupted i try to fix it useing fsck command in single user mode and multiuser mode and its not work please see the attaches
4 REPLIES
Raj D.
Honored Contributor
Solution

Re: /var is not mounted

Mohammad sa,
bc_read failure is menas fsck unable to read the blocks, and there is bad spot on the disk.

- fsck can not fix this issue, as the portion of the disk is bad.
- you can reduce the lv , create with newfs, mount it , restore from backup and check.


Hth,
Raj.
" If u think u can , If u think u cannot , - You are always Right . "
mohammad_sa
Occasional Advisor

Re: /var is not mounted

thank you Raj D

that means i have two solutions

1- i buy a new disk .

2- i use your way to reduce the size of the LV and create a new one

for that thank you MR.Raj D and have a nice day
Raj D.
Honored Contributor

Re: /var is not mounted

Mohammad, Thats great!,

You too have a nice day and Enjoy the evening once the issue fixed.

Raj.
" If u think u can , If u think u cannot , - You are always Right . "
stephen peng
Valued Contributor

Re: /var is not mounted

you don't have mirrored vg00? i think you need a os restore.