cancel
Showing results for 
Search instead for 
Did you mean: 

vpdb update

SOLVED
Go to solution
hpux_sun
Occasional Advisor

vpdb update

hi,

iam planning to do mirror for the root disk , in vpar enivronment.

at present there is no mirror for the root disk.

 

can you please provide me the procedure needs to follow.

 

 

4 REPLIES
Patrick Wallek
Honored Contributor

Re: vpdb update

What type or model of system?  Itanium or PA-RISC?

 

 

Torsten.
Acclaimed Contributor

Re: vpdb update

In general the procedure is the same as it is for non vpar systems, but the autoboot string on the disk must point to /stand/vpmon instead of /stand/vmunix.  In a superdome 2 a vPar is just like a nPar with no difference in mirroring.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
hpux_sun
Occasional Advisor

Re: vpdb update

am i need to update the H/W path of the disk to VPDB? or

automatically it will uppdate in to vpdb? pls help me

Torsten.
Acclaimed Contributor
Solution

Re: vpdb update

You update the vpdb with a command like this:

 

# vparmodify -p vpar1 -m io:2/0/3/1.0.4.1.0.0.0.0.0.0:ALTBOOT


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!