1748213 Members
3066 Online
108759 Solutions
New Discussion юеВ

Re: vxfs 4.1 and 5.0

 
shashi kanth
Super Advisor

vxfs 4.1 and 5.0

I have one 2TB vxfs/vxvm file system on SAN in 11iv2 .

I have re-installed OS with 11iv3 (April 2009) , by-default it installed vxfs 4.1.

Since i used vxvm with 11iv2, i have installed vxvm5 (vxvm 4.1 is not having in 11iv3 April 2009). vxvm5 also installed vxfs5.

I can able to import/mount my data.

But some times (not always), the basic commands like chown,chmod,etc... hangs.

so i am getting worried, did i missed any step.

If i created a FS with 4.1 in 11iv2, is it required extend that FS from 4.1
to 5.0 before i mount in 11iv3?

Thanks.
3 REPLIES 3
Suraj K Sankari
Honored Contributor

Re: vxfs 4.1 and 5.0

Hi,
>>But some times (not always), the basic commands like chown,chmod,etc... hangs

Some times so many server's are showing this type of behaviour if this type of problem is not frequently then I think its normal.

Did you checked when this commands are going hung status at that time what are the process are running? What is the CPU load? What is memory utilization?

Suraj
shashi kanth
Super Advisor

Re: vxfs 4.1 and 5.0

It's frequent.

Any command (chmod,chown,scp) which works on this data (vxfs 4.1), will makes the box hangs.

But any commands which works on the other data (which are created with vxfs5) works fine.


Johnson Punniyalingam
Honored Contributor

Re: vxfs 4.1 and 5.0

Hi ,

>>Any command (chmod,chown,scp) which works on this data (vxfs 4.1), will makes the box hangs.<<

you say commands under (vxfs 4.1) makes the box hangs.. can you please check "dmesg" or /var/adm/syslog/syslog ..? when it hangs


do you have the vxfs "Critical pathes" applied in the server.

Thanks,
Johnson


Problems are common to all, but attitude makes the difference