HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

waiting for queue to be enabled on axis316f17.nfpc.com

 
nfpc_1
Advisor

waiting for queue to be enabled on axis316f17.nfpc.com

Hi All,
I have a Unix server (server A) where 'printer' A pointing to 'Axis A' is working fine
I have another server (Server B) where I am trying to set up the same printer. The host file on 'server B' is the same as on 'server A'. When I send a test file from 'server B', I get an error 'waiting for queue to be enabled on axis316f17.nfpc.com'
What could be the cause of this.
Server B has Server A setup as the DNS server.
Thanks in advance for any help.
A/A
5 REPLIES
OldSchool
Honored Contributor

Re: waiting for queue to be enabled on axis316f17.nfpc.com

did you ever enable the queue?

is this a remote or network printer?

actual commands issued / responses when you configured it on serverB?

what is the relationship (if any) between "Axis A" and "axis316f17.nfpc.com"?
nfpc_1
Advisor

Re: waiting for queue to be enabled on axis316f17.nfpc.com

Thank you for your response.
I did enable the printer using
"enable printer_name". I get the message
----"printer "ap" was already enabled"---
I used SAM to configure the printer as a remote printer.
axis316f17.nfpc.com is the host name for the axis box in host file on both the servers.
Robert Salter
Respected Contributor

Re: waiting for queue to be enabled on axis316f17.nfpc.com

Did you check the queu on Axis A? What about the /var/adm/lp/log?
Time to smoke and joke
nfpc_1
Advisor

Re: waiting for queue to be enabled on axis316f17.nfpc.com

Nothing in the log file. How do I check the queue on the axis?
nfpc_1
Advisor

Re: waiting for queue to be enabled on axis316f17.nfpc.com

When I ping the printer name 'ap' on server A, it resolves to axis316f17.nfpc.com. In the host file ap is actually associated with AXIS5F582F.nfpc.com.
How can it be? And how can the printer work on Server A...
Help please!!!!