HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

which bootpath is the "active" bootpath?

 
SOLVED
Go to solution
Tim Killinger
Regular Advisor

which bootpath is the "active" bootpath?

on an hpux 11.11 box with a mirrored system disk set, how do I tell which boot path the box is currently booted from? setboot tells me which path is primary and which is alternate, but how do I know for sure which path it was last booted from?

Primary bootpath : 0/1/1/0.0.0
Alternate bootpath : 0/1/1/0.1.0

Autoboot is ON (enabled)
Autosearch is ON (enabled)
5 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: which bootpath is the "active" bootpath?

hi,

echo 'boot_string/s' | adb /stand/vmunix /dev/mem


mikap
Tim Killinger
Regular Advisor

Re: which bootpath is the "active" bootpath?

echo 'boot_string/s'|adb /stand/vmunix/dev/mem
cannot open `/stand/vmunix/dev/mem'
symbol not found
Michal Kapalka (mikap)
Honored Contributor
Solution

Re: which bootpath is the "active" bootpath?

hi,


/stand/vmunix/dev/mem

/stand/vmunix /dev/mem

it must be space between.

wrong formated from forum.

mikap
Hakki Aydin Ucar
Honored Contributor

Re: which bootpath is the "active" bootpath?

Did you try to issue command:
lvlnboot -v
Tim Killinger
Regular Advisor

Re: which bootpath is the "active" bootpath?

echo 'boot_string/s' | adb /stand/vmunix /dev/mem
boot_string:
boot_string: disk(0/1/1/0.0.0.0.0.0.0;0)/stand/vmunix

I thought I had last booted manually of path
0/1/1/0.1.0, but if this is correct, I guess I did not.


icgscnv1:/etc # setboot
Primary bootpath : 0/1/1/0.0.0
Alternate bootpath : 0/1/1/0.1.0

Autoboot is ON (enabled)
Autosearch is ON (enabled)