who can help me about a LSM mirror disk replace step

[Fred.Wu]

It's not a root disk, but a data one.
Is the step all same as replacement for a root disk?
Can anyone give me a hand? thanks a lot.

Here is the structure of the dg:

Disk group: share_dg1

DG NAME GROUP-ID
DM NAME DEVICE TYPE PRIVLEN PUBLEN PUBPATH
V NAME USETYPE KSTATE STATE LENGTH READPOL PREFPLEX
PL NAME VOLUME KSTATE STATE LENGTH LAYOUT ST-WIDTH MODE
SD NAME PLEX PLOFFS DISKOFFS LENGTH DISK-NAME DEVICE

dg share_dg1 1007892010.1179.smp1

dm rz128c rz136c simple 1024 106658800 /dev/rrz136c
dm rz136c - - - - -

v ctl01 gen ENABLED ACTIVE 102400 SELECT -
pl ctl01-01 ctl01 ENABLED ACTIVE 102400 CONCAT - RW
sd rz128c-01 ctl01-01 0 0 102400 rz128c rz136c
pl ctl01-02 ctl01 DISABLED NODEVICE 102400 CONCAT - RW
sd rz136c-01 ctl01-02 0 0 102400 rz136c -

v ctl02 gen ENABLED ACTIVE 102400 SELECT -
pl ctl02-01 ctl02 ENABLED ACTIVE 102400 CONCAT - RW
sd rz128c-02 ctl02-01 0 102400 102400 rz128c rz136c
pl ctl02-02 ctl02 DISABLED NODEVICE 102400 CONCAT - RW
sd rz136c-02 ctl02-02 0 102400 102400 rz136c -

[Michael Schulte zur Sur · Accepted solution]

Hi,

I think, you will find here all the necessary steps for a disk replacement with LSM:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=211205

greetings,

Michael

[Fred.Wu]

Hi,
This really give me a quite helpful instruction .
Thanks a lot.

best regards
Fred