Server Management - Systems Insight Manager
1748183 Members
3373 Online
108759 Solutions
New Discussion

Re: Adding a server in SIM

 
Bjarni Sigurðsson
Occasional Contributor

Adding a server in SIM

I have just installed SIM on a server.
Now I want to add a server to monitor.
I can not figure out how to add this server.
Can you please help me with that?

Best regards
Bjarni Sig
7 REPLIES 7
Rich Purvis
Honored Contributor

Re: Adding a server in SIM

You can run an automatic Discovery task or if you want to add a single server you can run a manual Discovery task.

-Rich
Why does my tivo keep recording Nickelodeon?
Lisa Waters_1
Advisor

Re: Adding a server in SIM

Correct. By going through Options - Discovery - Manual Discovery you can find a single server by either IP address or DNS name.
If you are discovering many servers you can select Options - Discovery - Automatic Discovery and input an IP address range to be discovered such as 172.31.112.1-172.31.113.254 OR you can just enter several individual specific IP addresses, not necessarily in a range, to be discovered.
Hope this helps!

LisaBeth
Bernie_18
New Member

Re: Adding a server in SIM

From the SIM server from a command line run mxnode -a servername if you just want to add one server. If you have a list of servers you want to add just do a for loop to a text file. "for %a in (serverlist.txt)do mxnode -a %a"
simarun
Visitor

Re: Adding a server in SIM

ich ip is that ILO or system IP?

JanAmi
New Member

Re: Adding a server in SIM

Hi guys, I am new to HP SIM.

Just installed latest HP SIM on OEL and I don't see Options - Discovery - Manual Discovery from the web page...

any help would be greatly appreciated!

 

Jan

JanAmi
New Member

Re: Adding a server in SIM

ass well, when running /opt/hp/vcrepository/etc/vcrepositoryconfig.sh

getting an error setup is incomplete, please check screen shot bellow:

[root@oel~]# /opt/hp/vcrepository/etc/vcrepositoryconfig.sh
Stopping HP Linux Version Control Repository Manager: [  OK  ]
Warning: VCREPOSITORY has not been properly configured.

setup is incomplete!

Starting HP Linux Version Control Repository Manager: [  OK  ]
Million thanks for any help!

Jan

 

Andrew_Haak
Honored Contributor

Re: Adding a server in SIM

Hello,

you did open the startpage at https://servername:50000?

can you post a screenshot of the main page?

 

 

Kind regards,

Andrew