Connecting SIM 7.5.1 to StoreOnce D2D devices

[cesarpegado]

Can anyone conifrm how you can connect a D2D device to HP SIM. 

Do you use SNMP, or is there another method?

[PrzemekK]

Hello,

Starting point - http://h17007.www1.hpe.com/us/en/enterprise/servers/solutions/info-library/index.aspx?cat=extended_ambient_operating_support

Here is support matrix for 7.5 - http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04762085

If You want to monitor hardware you can do it by online support or hosted insight remote support-  here is instructions http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04743807

Here is how you can configure manually mibs in hp sim for storeonce -

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03602547-10.pdf page 254

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04495512&sp4ts.oid=3355761

[cesarpegado]

Thanks for your help. 

I feel like i'm almost there, i've setup the trapsink on D2D device, using SNMP v1 i've set a straing of lets say TEST and HP Sim is set to read to Test on SNMP.

I've also downloaded the MIBs which look like they are a couple of years old (2014) but i followed the instruction to compile them etc, but when i check snmp trap settings, i can see SEMI-MIB.mib in the list, but when i select there no trap name, event type or the other fields. 

Have i compiled them wrong? I did the following

C:\Program Files\HP\Systems Insight Manager\mibs>mcompile SEMI-MIB.mib

HP Systems Insight Manager Mib Compiler, Version 5.0.2.1
Copyright (c) 2003-2006 Hewlett Packard Corporation

Compiling SEMI-MIB.mib

Processing import file: SNMPv2-SMI.mib
Processing import file: SNMPv2-TC.mib
Processing import file: SNMPv2-CONF.mib
Mib Compilation completed successfully

C:\Program Files\HP\Systems Insight Manager\mibs>mxmib -a SEMI-MIB.cfg

IMPORTING CFG SEMI-MIB.cfg
Trap: hpHttpMgCriticalHealthTrap is redundant.
Trap: hpHttpMgShutdown is redundant.
Trap: hpHttpMgHealthTrap is redundant.
Trap: hpHttpMgNonRecoverableHealthTrap is redundant.
Trap: hpHttpMgDeviceAddedTrap is redundant.
Trap: hpHttpMgDeviceRemovedTrap is redundant.
Trap: hpHttpMgOKHealthTrap is redundant.
Trap: hpHttpMgWarningHealthTrap is redundant.
Trap: hpHttpMgUnknownHealthTrap is redundant.

Please delete the old MIB and then add the current MIB.

COMMAND COMPLETED SUCCESSFULLY

C:\Program Files\HP\Systems Insight Manager\mibs>mcompile TRAP-DESTINATION-MIB.
ib

HP Systems Insight Manager Mib Compiler, Version 5.0.2.1
Copyright (c) 2003-2006 Hewlett Packard Corporation

Compiling TRAP-DESTINATION-MIB.mib

Processing import file: RFC-1212.mib
Processing import file: RFC1155-SMI.mib
Processing import file: SNMPv2-TC.mib
Processing import file: SNMPv2-SMI.mib
Mib Compilation completed successfully

C:\Program Files\HP\Systems Insight Manager\mibs>mxmib -a TRAP-DESTINATION-MIB.
fg

IMPORTING CFG TRAP-DESTINATION-MIB.cfg
COMMAND COMPLETED SUCCESSFULLY

[cesarpegado]

Ive attached a screen shot showing the SNMP details looking empty, if anyone could give me some advice