Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Fiber Channel cards monitoring through SIM

SOLVED
Go to solution
kkpro
Regular Advisor

Fiber Channel cards monitoring through SIM

Hi,

I have two Proliant DL380 G7 with hp snmp agents (RHEL 6), and monitoring was OK. Now I added two Fiber Channel cards (HP 82Q 8Gb), then enabled  cmafcad agent (was disabled), restarted snmp agents and hp system management homepage. And still see no any traces of the these FC cards in web page.

Must I do something else ?

4 REPLIES
Andrew_Haak
Honored Contributor

Re: Fiber Channel cards monitoring through SIM

Hello,

If you use a Gen8 or newer server you need to install Agentless Managment Agent software and configure SNMP on the ILO. The software you use is software that works on Gen7 and below.

 

Look for AMS in this forum and you should find info how to configure the ILO4.

 

Kind regards,

Andrew
kkpro
Regular Advisor

Re: Fiber Channel cards monitoring through SIM

Oh sorry, my bad. These two servers are G7, not Gen8.

Andrew_Haak
Honored Contributor

Re: Fiber Channel cards monitoring through SIM

Can you post a screenshot of you SMH?
Kind regards,

Andrew
kkpro
Regular Advisor
Solution

Re: Fiber Channel cards monitoring through SIM

Don't know, what was the reason, but after serveral server reboots FC cards begun to appear in "External Storage Connections" subsection of "Storage"