Server Management - Systems Insight Manager
1748204 Members
4003 Online
108759 Solutions
New Discussion юеВ

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

 
SOLVED
Go to solution
rib11
Occasional Advisor

HP SIM 6.3 - mxdomainmgr.exe high memory usage

HP SIM and RSP is installed on a DL360G6 with 8GB RAM and Windows 2008R2.

The problem is, that hpsim consumes too much memory.

 

After restart of mxdomainmgr.exe service it grows immediately.

 

How to resolve this issue?

regards 

4 REPLIES 4
Suman_1978
HPE Pro
Solution

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

Hi,

 

You may try the following work around:

 

1.  On the Microsoft Windows CMS, in SNMP Service Properties, under the Security tab, deselect the Send Authentication trap checkbox.

2.  Restart the SNMP and SIM services.

Refer to the attached image.

 



Thank You!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

For product specific Guided Troubleshooting visit; http://www.hp.com/support/hpgt
Want to know How to use HP Guided Troubleshooting?  Visit the below link.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03283214


I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo

Jan Soska
Honored Contributor

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

very good post.

Jan
clinton_me
Occasional Visitor

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

Hello,

Has this completely solved the issue? The memory did not go high anymore?

Thank you,
TeerapongJ
New Member

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

if i do follow your reccommed, i would like to know impact when i deselect in send authentication trap.