Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 6.3 - mxdomainmgr.exe high memory usage

SOLVED
Go to solution
rib11
Occasional Advisor

HP SIM 6.3 - mxdomainmgr.exe high memory usage

HP SIM and RSP is installed on a DL360G6 with 8GB RAM and Windows 2008R2.

The problem is, that hpsim consumes too much memory.

 

After restart of mxdomainmgr.exe service it grows immediately.

 

How to resolve this issue?

regards 

4 REPLIES
Suman_1978
HPE Pro
Solution

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

Hi,

 

You may try the following work around:

 

1.  On the Microsoft Windows CMS, in SNMP Service Properties, under the Security tab, deselect the Send Authentication trap checkbox.

2.  Restart the SNMP and SIM services.

Refer to the attached image.

 



Thank You!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

For product specific Guided Troubleshooting visit; http://www.hp.com/support/hpgt
Want to know How to use HP Guided Troubleshooting?  Visit the below link.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03283214

Jan Soska
Honored Contributor

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

very good post.

Jan
clinton_me
Occasional Visitor

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

Hello,

Has this completely solved the issue? The memory did not go high anymore?

Thank you,
TeerapongJ
Occasional Visitor

Re: HP SIM 6.3 - mxdomainmgr.exe high memory usage

if i do follow your reccommed, i would like to know impact when i deselect in send authentication trap.