HP Systems Insight Manager for Microsoft Hyper-v 2012 (core version)

[ncc]

I would like to install the HP Systems Insight Manager, Array Configuration and similar tools on Hyper-V 2012 (core version) I have searched around and found bits of information but could really do with a list of downloads and instructions. is there such a thing?

P.S. This thread has been moved from Windows Server 2012 to ITRC HP Systems Insight Manager Forum. - Hp Forum Moderator

[ncc]

for those that may need it....

Files needed:
SIM_7.4_Z7550-96078.exe
cp019795.exe
cp019213.exe
cp019017.exe
cp015133.exe


•    Run SIM_7.4_Z7550-96078.exe from a command prompt on your HyperV server
•    Click ok and type C:\HP in the ‘Unzip to Folder’ window, click Unzip
•    run C:\hp\sim7400-win\sysmgmt\smh_install_x64.exe
•    Next, Next,
•    Tick both boxes ‘Anonymous Access’ and ‘Local Access’ changed the Radio button to ‘Administrator – Grant access to secure and unsecured pages’
•    Enable Port 2301 is ticked, Next
•    Trust Mode for HTTP, Select ‘Trust All’ Next
•    Next at IP Binding
•    Next at IP Restricted Logins
•    Next at summary page, Finish when install is complete.
•    Type the following at a command prompt: tasklist /FI "IMAGENAME eq hpsmhd.exe" You should have the same executable ‘hpsmhd.exe’ displayed twice in the results pane with separate PIDs.
•    Type netstat -a –b, within the list you should see
o    TCP 0.0.0.0:2301     HYPERV01:0         LISTENING
[hpsmhd.exe]
o    TCP 0.0.0.0:2381     HYPERV01:0         LISTENING
[hpsmhd.exe]
•    Type the following commands
o    netsh advfirewall firewall add rule name="HP SHM" dir=in protocol=TCP localport=2381 action=allow
o    netsh advfirewall firewall add rule name="HP SHM" dir=in protocol=TCP localport=2301 action=allow
•    Run patches located in order the listed below
o    1st, cp019795.exe, click Install and install again. Close when finished
o    2nd, cp019213.exe, click Install and install again. Close when finished, no to reboot
o    3rd, cp019017.exe, click Install and install again. Close when finished
o    4th, cp015133.exe, click Install, next etc – this installs HP Insight Diagnostics.
•    You can now browse to https://serverIP:2381 from any computer on the same subnet to access the HP tools.