HP VCRM setup

[Andrew_Haak]

Hello, I don't see the attachment or am i missing something ?

[lakshmana1]

Looks like im not able to attach....it's not getting attached when i click on add attachment after selecting file through browse.

[Andrew_Haak]

But anyway, If you want to set the new VCRM you nee a trust with the servers you want to fix. If that's oke you nee to fix one server. Depending on what you want to fix you could need to set more per baseline. If you fixed one make a selection for the servers you want to fix, once selected select Configure > Replicate Agent Settings. From there you get a wizzard, here you selct your source server with the correct settings. You need a trust with this server also. Click next, now you can select more options (all options in the VCA/SMH). Select the options you need in this case HP Version Control Agent > Version Control Agent Configuration Settings > Version Control Agent > Version Control Repository Manager Machinename. Here you could also replicate you baseline. This will only work for the same OS servers. This is why you could need so fix the VCA for all OSses you want to replicate the settings for.

[lakshmana1]

Installation of VCRM 7.4.0.0 on VM server has been completed. When try to configure VCA 2.1.2.740 (running on one of the physical server) to point to this VCRM 7.4.0.0 server getting the following error message "The specified repository is invalid or not reachable"

[Andrew_Haak]

Hello, Do you use the FQDN adress? is the 2301 and 2381 port open on the VCRM server ? do you use OS credentials to connect to the VCRM ? Can you open the https://vcrmserver.domain.local:2381 ?

[lakshmana1]

Yes, used FQDN adress in the Computer Name field on VCA Yes, used VCRM server local administrator and password on VCA to connect to the VCRM Yes, Checked 2301 and 2381 ports thru self telnet and they are opened on the VCRM server https://FQDN server name:2381/ is opneing in VCRM server and showing web certificate error but not opening in VCA server

[Andrew_Haak]

You need to update your VCA first so you can connect to the VCRM server.

Look here for windows x64

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5177951&swItemId=MTX_72d53359c85340f899e81986a7&swEnvOid=4064

[lakshmana1]

Thanks. Let me try that, so older version of VCA is not supported?

[Andrew_Haak]

Correct,

You need to either do a manual install if the number of servers is small or push the installation without the use of the VCA. So that can be hpsum, any other deploy tool or SIM with the option to not use VCA and push it from SIM.

[lakshmana1]

VCA is a part of SMH. Can VCA update alone possible or both need to be updated? Does it require server reboot?