Server Management - Systems Insight Manager
1753687 Members
5170 Online
108799 Solutions
New Discussion юеВ

mxdomainmgr.exe CPU utilization

 
Tim McGue
Regular Advisor

mxdomainmgr.exe CPU utilization

I see mxdomainmgr.exe continue to use 30-50% CPU utilization on an ongoing basis. Are others seeing this too? Is this expected?
11 REPLIES 11
Rob Buxton
Honored Contributor

Re: mxdomainmgr.exe CPU utilization

I've seen it use 100% but usually when the Discovery task is running.

Normally CPU Usage is quite low.

You might want to see if there are any tasks running during these periods.
Tim McGue
Regular Advisor

Re: mxdomainmgr.exe CPU utilization

I've checked for anything in the scheduled tasks and nothing shows as running while the CPU is high.

Furthermore, there is another post about a memory leak. I've watched the same process and over the past 3 hours is has gone from 448,000K memory usage to 980,000K.

Tim
Arjen Dragt
Occasional Contributor

Re: mxdomainmgr.exe CPU utilization

I saw this when I had HP SIM installed on too low-powered a box.

I moved it to a new DL380 and it is close to sleeping...

What hardware are you running this on?
Jadrice Toussaint
Honored Contributor

Re: mxdomainmgr.exe CPU utilization

This post to confirm my findings. After conitnous stress testing and data gathering, I did not find any proof of memory leak with the mxdomainmgr.exe. The process when no polling and other related tasks are running, idles at 140MB of memory.
Tim McGue
Regular Advisor

Re: mxdomainmgr.exe CPU utilization

Hardware configuration:
DL380 G3
4 Procs - 2 at 2.4 GHz, 2 at 500 MHz
4 GIG of memory

Current memory consumption of mxdomainmgr.exe:
1.5 GIG

CPU utilization is better now. It is under 10% (but I can't confirm the SIM is actually functioning now).

Tim
Rob Buxton
Honored Contributor

Re: mxdomainmgr.exe CPU utilization

Tim,

How many devices are you monitoring?
Tim McGue
Regular Advisor

Re: mxdomainmgr.exe CPU utilization

I have about 200 total systems with about 150 of those being servers.
Rob Buxton
Honored Contributor

Re: mxdomainmgr.exe CPU utilization

I'm only monitoring about 130, of which only about 80 have Agents on them.
I've got HPSIM on an ML370 G2 with 1GB of memory.
The database is on a separate server.

The number of devices you're monitoring isn't particularly high, odd that there should be a big difference in resource usage.

Just watching ours now and it's using between 20-40% CPU and 205 K of memory, but it is also running the Software Polling task.


Steven Kaufer
New Member

Re: mxdomainmgr.exe CPU utilization

I have noticed this happen on my system as well. I'm also running it on a DL380 G3. This tends to happen when there is a discovery running on the SIM.