Tape Libraries and Drives
Showing results for 
Search instead for 
Did you mean: 

1533 in external case and SCSI Switch

Stu Hogue
Occasional Visitor

1533 in external case and SCSI Switch

I have a HP 1533A SCSI tape drive that I have put in a ANTEC datatank.
I have a question about setting the SCSI switch. The data tank does
have a switch on the back there are 4 wires (black, blue, yellow and
red) that come from the switch. On the back of the HP 1533A are
the normal jumpers for the SCSI ID setting. There are 5 pins in
a small enclosure above the jumpers. Does any one know the correct
method to enable the external SCSI ID switch?

David Ruska
Honored Contributor

Re: 1533 in external case and SCSI Switch

See my reply over in the other forum...

The journey IS the reward.