HPE Community
StoreEver Tape Storage
1753500 Members
4499 Online
108794 Solutions
New Discussion

20/700 SCSI ID lose

 
public
Regular Advisor

‎11-30-2004 03:08 PM

‎11-30-2004 03:08 PM

20/700 SCSI ID lose

Hi gentlemans
My custome have a 20/700(A5597A) tape library.
Because the factory's electric system problem,the power doesn't shut normally .
After the electric system came back ,user powered on the library and found all tape drives SCSI ID lost.
When I set the ID again, it works normally.
Why the SCSI ID lost after power lost?
0 Kudos
Reply
1 REPLY 1
Beauregard
Advisor

‎12-02-2004 06:32 AM

‎12-02-2004 06:32 AM

Re: 20/700 SCSI ID lose

Hi,

After the library came back, you need to reset the bridge (poweroff / poweron).

The bridge came up faster than library and scsi drives are not available because the library is not up and running. Reboot the bridge and see !
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.