HPE Community
StoreEver Tape Storage
1752433 Members
6136 Online
108788 Solutions
New Discussion

A7445b Storageworks ultrium 1760.

 
wadepc
Occasional Visitor

‎03-09-2017 03:50 AM

‎03-09-2017 03:50 AM

A7445b Storageworks ultrium 1760.

Hi one of my customers have a HP  a7445b Storageworks  ultrium 1760. 

they have asked if it is possible to change the 2 scsi drives int he back on the unit to USB drives. 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-09-2017 07:17 AM - edited ‎03-09-2017 07:18 AM

‎03-09-2017 07:17 AM - edited ‎03-09-2017 07:18 AM

Re: A7445b Storageworks ultrium 1760.

The drives are LVD SCSI and the connector is just routed to the back of the chassis.

AFAIK you can get the same as a SAS version, but you need a chassis with SAS connectors and of course new SAS drives, see

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c01121333

You can get the chassis with USB, but I don't know if you can get USB drives too.

This is already an old product ...

[added]

there was no USB LTO option:

https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/05/A8007B.htm


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.