HPE Community
StoreEver Tape Storage
1753477 Members
6219 Online
108794 Solutions
New Discussion юеВ

Re: AG116A

 
badsector
Advisor

тАО12-10-2009 02:39 AM

тАО12-10-2009 02:39 AM

AG116A

Hi,

We have a AG116A MSL2024 tape drive with two LTO2 - 448 drives.

We need to replace this drives with the fastest available drives for this unit. This also needs to be the configuration with two drives.

Current connection type SCSI.

Is it possible to make this a FC library?


0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО12-10-2009 04:31 AM

тАО12-10-2009 04:31 AM

Re: AG116A

See

http://h18000.www1.hp.com/products/quickspecs/13258_div/13258_div.html

Drives can have SCSI, SAS or FC.


There are half and full high drives. You need 2 half.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
badsector
Advisor

тАО12-10-2009 05:56 AM

тАО12-10-2009 05:56 AM

Re: AG116A

Thanks Torsten.

This guide is helpful.

So just to clairy we can make a TL that uses currentlz LTO2 448 a one FC drive library?
0 Kudos
Reply
badsector
Advisor

тАО12-11-2009 05:15 AM

тАО12-11-2009 05:15 AM

Re: AG116A

Anyone,

Can anyone confirm that we can make MSL2024 with one LTO2 - 448 DRIVE a one FC full height MSL2024 library?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.