Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

AUtoloader configuration on HPUX-11v2 with SAS connection

Seeni_1
Occasional Visitor

AUtoloader configuration on HPUX-11v2 with SAS connection

Hi All,

Need some info,how to detect autoloader & tape drive which the connection using SAS PCi-e. Ioscan only show the SAS Pci-e path only!
1 REPLY
Torsten.
Acclaimed Contributor

Re: AUtoloader configuration on HPUX-11v2 with SAS connection

Could you post an "ioscan -fn" please?

You will see a device like /dev/ciss3 or another number, try

# sautil /dev/ciss3
# saconfig /dev/ciss3

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!