- Community Home
- >
- Storage
- >
- Data Protection and Retention
- >
- StoreEver Tape Storage
- >
- Re: After replace a DDS2 on HPUX 11.0 the tape no...
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 02:53 AM
тАО12-02-2004 02:53 AM
After replace a DDS2 on HPUX 11.0 the tape not wroking.
Thanks and Regards...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 03:14 AM
тАО12-02-2004 03:14 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
What is the ref of the new tape?
Did you check the DIP switch on it???
Stf ;-)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 03:23 AM
тАО12-02-2004 03:23 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
Thnk you..
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 03:40 AM
тАО12-02-2004 03:40 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
Stf ;-)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 04:02 AM
тАО12-02-2004 04:02 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 05:46 AM
тАО12-02-2004 05:46 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
# ioscan -fn
Stf
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 05:57 AM
тАО12-02-2004 05:57 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
HP-UX isso B.11.00 A 9000/800 1203217381 two-user license
# ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
bc 0 root CLAIMED BUS_NEXUS
bc 1 8 ccio CLAIMED BUS_NEXUS I/O Adapter
bc 2 10 ccio CLAIMED BUS_NEXUS I/O Adapter
ext_bus 0 10/0 c720 CLAIMED INTERFACE GSC built-in Fast/Wide SCSI I
nterface
target 0 10/0.5 tgt CLAIMED DEVICE
disk 0 10/0.5.0 sdisk CLAIMED DEVICE SEAGATE ST15150W
/dev/dsk/c0t5d0 /dev/rdsk/c0t5d0
target 1 10/0.6 tgt CLAIMED DEVICE
disk 1 10/0.6.0 sdisk CLAIMED DEVICE SEAGATE ST15150W
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
target 2 10/0.7 tgt CLAIMED DEVICE
ctl 0 10/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
bc 3 10/4 bc CLAIMED BUS_NEXUS Bus Converter
tty 0 10/4/0 mux2 CLAIMED INTERFACE MUX
/dev/diag/mux0 /dev/diag/tty0p5 /dev/tty0p2
/dev/diag/tty0p0 /dev/diag/tty0p6 /dev/tty0p3
/dev/diag/tty0p1 /dev/diag/tty0p7 /dev/tty0p4
/dev/diag/tty0p2 /dev/mux0 /dev/tty0p5
/dev/diag/tty0p3 /dev/tty0p0 /dev/tty0p6
/dev/diag/tty0p4 /dev/tty0p1 /dev/tty0p7
lanmux 0 10/4/4 lanmux0 CLAIMED INTERFACE HP J2146A - 802.3 LAN
lan 0 10/4/4.1 lan3 CLAIMED INTERFACE
/dev/diag/lan0 /dev/ether0 /dev/lan0
lanmux 1 10/4/8 lanmux0 CLAIMED INTERFACE HP J2146A - 802.3 LAN
lan 1 10/4/8.1 lan3 CLAIMED INTERFACE
/dev/diag/lan1 /dev/ether1 /dev/lan1
lanmux 2 10/4/12 lanmux0 CLAIMED INTERFACE HP J2146A - 802.3 LAN
lan 2 10/4/12.1 lan3 CLAIMED INTERFACE
/dev/diag/lan2 /dev/ether2 /dev/lan2
lanmux 3 10/4/16 lanmux0 CLAIMED INTERFACE HP J2146A - 802.3 LAN
lan 3 10/4/16.1 lan3 CLAIMED INTERFACE
/dev/diag/lan3 /dev/ether3 /dev/lan3
ext_bus 1 10/8 c720 CLAIMED INTERFACE GSC add-on Fast/Wide SCSI Int
erface
target 3 10/8.1 tgt CLAIMED DEVICE
disk 2 10/8.1.0 sdisk CLAIMED DEVICE DGC C2300WDR5
/dev/dsk/c1t1d0 /dev/rdsk/c1t1d0
disk 3 10/8.1.1 sdisk CLAIMED DEVICE DGC C2300WDR5
/dev/dsk/c1t1d1 /dev/rdsk/c1t1d1
target 4 10/8.6 tgt CLAIMED DEVICE
ctl 1 10/8.6.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t6d0
ba 0 10/12 bus_adapter CLAIMED BUS_NEXUS Core I/O Adapter
ext_bus 3 10/12/0 CentIf CLAIMED INTERFACE Built-in Parallel Interface
/dev/c3t0d0_lp
ext_bus 2 10/12/5 c720 CLAIMED INTERFACE Built-in SCSI
target 5 10/12/5.2 tgt CLAIMED DEVICE
disk 4 10/12/5.2.0 sdisk CLAIMED DEVICE TOSHIBA CD-ROM XM-5401TA
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0
target 6 10/12/5.3 tgt CLAIMED DEVICE
tape 1 10/12/5.3.0 stape CLAIMED DEVICE HP C1533A
/dev/rmt/1m /dev/rmt/c2t3d0BESTn
/dev/rmt/1mb /dev/rmt/c2t3d0BESTnb
/dev/rmt/1mn /dev/rmt/c2t3d0DDS
/dev/rmt/1mnb /dev/rmt/c2t3d0DDSb
/dev/rmt/c2t3d0BEST /dev/rmt/c2t3d0DDSn
/dev/rmt/c2t3d0BESTb /dev/rmt/c2t3d0DDSnb
target 7 10/12/5.7 tgt CLAIMED DEVICE
ctl 2 10/12/5.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
lan 4 10/12/6 lan2 CLAIMED INTERFACE Built-in LAN
/dev/diag/lan4 /dev/ether4
ps2 0 10/12/7 ps2 CLAIMED INTERFACE Built-in Keyboard/Mouse
/dev/ps2_0 /dev/ps2_1 /dev/ps2kbd /dev/ps2mouse
bc 4 10/16 bc CLAIMED BUS_NEXUS Bus Converter
ext_bus 4 10/16/4 scsi3 CLAIMED INTERFACE HP 28696A - Wide SCSI ID=7
ext_bus 5 10/16/8 scsi1 CLAIMED INTERFACE HP 28655A - SE SCSI ID=7
ext_bus 6 10/16/9 lpr2 CLAIMED INTERFACE HP 28655A - Parallel Interfac
e
/dev/c6t0d0_lp /dev/diag/c6t0d0_lp
lanmux 4 10/16/12 lanmux0 CLAIMED INTERFACE HP J2146A - 802.3 LAN
lan 5 10/16/12.1 lan3 CLAIMED INTERFACE
/dev/diag/lan5 /dev/ether5 /dev/lan5
lanmux 5 10/16/16 lanmux0 CLAIMED INTERFACE HP J2146A - 802.3 LAN
lan 6 10/16/16.1 lan3 CLAIMED INTERFACE
/dev/diag/lan6 /dev/ether6 /dev/lan6
processor 0 32 processor CLAIMED PROCESSOR Processor
processor 1 34 processor CLAIMED PROCESSOR Processor
memory 0 49 memory CLAIMED MEMORY Memory
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 09:24 AM
тАО12-02-2004 09:24 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
# tar -cvf /dev/rmt/1m /tmp (for example)
what is the error message?
Stf
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 09:47 AM
тАО12-02-2004 09:47 AM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
tar: cannot open /dev/rmt/1m
#
Thanks for your help..
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО12-02-2004 07:58 PM
тАО12-02-2004 07:58 PM
Re: After replace a DDS2 on HPUX 11.0 the tape not wroking.
I think your DDS2 is dead...
Stf