Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

ArcServe does not recognise tape drive, but Windows System Does

Ayman Altounji
Valued Contributor

ArcServe does not recognise tape drive, but Windows System Does

Hello,

I have just installed a 20/40GB DAT drive in a Pro 370, I have installed it on the default SCSI id of 6. There is power to it and it is connected.

I have installed the drivers in Windows 2000, and Windows Device Manager says the device is working correctly.

However Arcserve does not see the device at all.

Any pointers ?,

thanks
1 REPLY
Ayman Altounji
Valued Contributor

Re: ArcServe does not recognise tape drive, but Windows System Does

That's your problem, arcserve requires no drivers for windows installed, remove the drivers all should be ok