StoreEver Tape Storage
1748105 Members
5012 Online
108758 Solutions
New Discussion юеВ

Re: ArcServer 2000 and TL881

 
Ayman Altounji
Valued Contributor

ArcServer 2000 and TL881

I've a problem with a TL881 (one drive) and ArcServe 2000 with SP2.
When I try to configure, in arcserve "Device Configuration", the tape library I have this result:
"The tape \ optical library must have a minimum of 1 device assigned". In ArcServe log I can see error 8000.
I've tried to configure TL881 also with the compaq utility TSMC 1.2, the result of standard test is "ABORT: # of drives improperly defined for library".
Some ideas ?

Sorry for my english
Thanks
2 REPLIES 2
Ayman Altounji
Valued Contributor

Re: ArcServer 2000 and TL881

Support for Digital Tape Library products are not handled by the Compaq Support Forum at this time. Please contact Compaq technical support for these products at 1-800-354-9000.
Ayman Altounji
Valued Contributor

Re: ArcServer 2000 and TL881

I have had this problem on a TL891. Fixed it by setting SCSI id of library to 1 and the drive to 2. Worked OK then