HPE Community
StoreEver Tape Storage
1753375 Members
5466 Online
108792 Solutions
New Discussion

Array Controller

 
Kranti Mahmudcom LTD
Occasional Contributor

‎02-27-2008 09:52 PM

‎02-27-2008 09:52 PM

Array Controller

Hi All,

I have newly installed a MSA 1000 tape Array with the server DL 580 G5 with OS Linux. But I failed to find out the Array controller as the system shows no array controller. Can anyone guide me what to do????
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎02-27-2008 10:42 PM

‎02-27-2008 10:42 PM

Re: Array Controller

You should ask linux related questions in the linux subforum - this is for hp-ux.


Anyway, your system should see the MSA controller and MSA volumes if the zoning and presentation is configured correctly.


Example:

hp_rescan -a
Rescanning /proc/scsi/qla2xxx/0...
Rescanning /proc/scsi/qla2xxx/1...

Scanning /proc/scsi/qla2xxx/1, target 0, LUN 32


scsi0 00 00 00 COMPAQ MSA1000 4.48 RAID
scsi0 00 00 01 COMPAQ MSA1000 4.48 Direct-Access
scsi0 00 00 02 COMPAQ MSA1000 4.48 Direct-Access
...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.