Autoloader HP SSL 1016

[Erik_42]

OS Win 2000 Server.Backup software BrightStor for Windows 9x. Device manager - all ok. Drivers from HP. SCSI card Adaptec AHA-2940U/AHA-2940UW. Autoloader dosn't work corectly. If i try format, erase tape, make inventory, i have this error message in event viewer.
The driver detected a controller error on \Device\Scsi\nfrd9601.
Where is problem?
Thx

[David Ruska · Accepted solution]

The 2940UW is a single-ended SCSI card. The preferred adapter is an LVDS SCSI adapter (e.g. 24940U2W, 29160, etc).

What drive type do you have?

[Marino Meloni_1]

>>>The driver detected a controller error on \Device\Scsi\nfrd9601.

I hope you didn't attached the unit on the wrong connector, the error message you are seeing is related to a Raid controller 4M or 4L for the IBM netfinity.

then or the error have nothing to do with your problem, or you have connected the wrong connector.

You can test the installation with BExec util, or run the L&TT diag tool

[Allan_24]

Hi,

>>haven't you try to update scsi bios?
see..

http://www.adaptec.com/worldwide/support/drivers_by_product.jsp?sess=no&language=English+US&cat=/Product/AHA-2940UW

>>how about an udate driver for your backup software?

http://esupport.ca.com/
(select a product)

>>SSL 1016 compatibility from Brightstor Arcserve 9

SDLT320 f.ware:V51 LIBRARY f.ware: V35
LTO2 f.ware:F3CW LIBRARY f.ware: V35



hope this helps,
@@,?