Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

SOLVED
Go to solution
Christian Peter
Frequent Advisor

BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

hi,

since i have L&TT 4.0 i can't calibrate my Dat24 drive... it always says --> the script competed execution...

with L&TT 3.5 SR1-4 i have'nt any problems to claibrate my drive... is there something new? or a bug in L&TT 4.0 ?!

greetings chris
5 REPLIES
Marino Meloni_1
Honored Contributor

Re: BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

Hi Chris,
for what I remember, the calibration procedure can be run only once on a specific unit, are you tring to recalibrate several time the same drive, or is this the first time you calibrate that drive?

Christian Peter
Frequent Advisor

Re: BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

hi,

this drive was never calibrated with HP L&TT.
if it was calibrated and someone try again to do this L&TT display a error message like --> unable to procede - this drive was currently calibrated.

i don't know the exactly error message.

it's not the first time i want to calibrate a drive. only L&TT 4.0 displays error messages. maybe you can test it @ your system?

if i want to calibrate a drive first i've to uninstall HP L&TT 4.0 and install the 3.5 SR4 version... after calibrating i have to uninstall version 3.5 and install version 4.0 ... that's not very funny :/

sorry for my bad english ;o)
greetings chris ...
mark davis_6
Occasional Visitor
Solution

Re: BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

Hi Chris,

I was able to reproduce the issue you saw using a C1537A drive. We will get this corrected for our next LTT release (currently scheduled for June). If you need to run the calibration, please use 3.5 SR4 for now.

Thanks for your help in improving L&TT.

regards,
Mark Davis
Christian Peter
Frequent Advisor

Re: BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

oh, i'm very happy :)
counting days to the new release *hihi*

thanks for answers & great service :) *TOP*
Christian Peter
Frequent Advisor

Re: BUG ?! - Calibration on Dat24 with HP L&TT 4.0 (SR1, SR2)

info: this bug is on ALL L&TT 4.0 releases (4.0 / 4.0 SR1 / 4.0 SR2)