Backup Problems with Ultrium 960

[Christian Robl]

My BackupExec 9.1 causes Errors after Updating my Netware 6.5 Server to SP5. Before the Update to SP5 my Backup runs with the SCSI driver ADPT160M Version 18.31.13 from November 2003. SP5 includes an newer Driver I have also downgraded the Driver to the older Version, but my Backup always run in an timeout.

##ERR##Error on HA:1 ID:3 LUN:0 HP ULTRIUM960 DRV.
##ERR##
##ERR##SCSI bus timeouts can be caused by a media drive that needs
##ERR##cleaning, a SCSI bus that is too long, incorrect SCSI
##ERR##termination, or a faulty device. If the drive has been working
##ERR##properly, clean the drive or replace the media and retry the
##ERR##operation.
##ERR##Vendor: HP
##ERR##Product: ULTRIUM960 DRV
##ERR##ID:
##ERR##Firmware: G2AD
##ERR##Function: Initialize(0)
##ERR##Error: A timeout has occurred on drive HA:1 ID:3 LUN:0 HP
##ERR##ULTRIUM960 DRV. Please retry the operation.(1)
##ERR##Sense Data:
##ERR##00 00 00 00 - 00 00 00 00 - 00 00 00 00 - 00 00 00 00
##ERR##00 00 00 00 - 00 00 00 00 - 00 00 00 00 - 00 00 00 00

After the timeout Error I have to reset the Server because BE does not find the Drive.

THe Ultrium Drive runs in an ML370 G3 can anyone help me