Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Tape Libraries and Drives
cancel
Showing results for 
Search instead for 
Did you mean: 

Beginner - configuring MSL5060 to L2000 server

blueman_1
Occasional Visitor

Beginner - configuring MSL5060 to L2000 server

What are the steps or commands that I should do after I connect MSL5060 successful to L2000 using fibre cable ?

I want to make the MSL5060 to be useable with the "mc" commands to check inventory and move tapes
1 REPLY
Víctor Cespón
Honored Contributor

Re: Beginner - configuring MSL5060 to L2000 server

If using fiber channel, you need to configure the NSR. Go to the NSR web, check that it detects the library controller and the drives on the SCSI ports.

Check that the FC port is active and has link. Go to the mapping menu and create a mapping. Assign the mapping to that host HBAs.

Then the host will see the library controller and drive(s).

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00637161/c00637161.pdf