HPE Community
StoreEver Tape Storage
1753521 Members
6281 Online
108795 Solutions
New Discussion

Re: Can I put a DLT4 Drive into an SSL1016 Library

 
Michael P Litz
Occasional Contributor

‎01-03-2006 06:31 AM

‎01-03-2006 06:31 AM

Can I put a DLT4 Drive into an SSL1016 Library

Quick background, we had an SSL1016 with DLT1 drive @ our warehouse. We replaced it with an SDLT Library. We hav about 1,000 DLT3 and DLT4 tapes that need to be catalogged. Since DLT1 uses the same tapes, but different format, is there a DLT4 drive I can throw into the SSL1016 to get it reading DLT3 and DLT4 media? I'm sure they don't make a specific drive for that chasis, but I would assume there has to be a drive somewhere in the product line that would fit the SSL1016.
0 Kudos
Reply
1 REPLY 1
Leon Rosier
Respected Contributor

‎01-04-2006 01:03 AM

‎01-04-2006 01:03 AM

Re: Can I put a DLT4 Drive into an SSL1016 Library

No, this is not possible because there is no way you can get the tapes in or out the drive. The older DLT drives use a mechanical meachanism (lever/handle)to inject and eject the tape. The newer ones do it electronically

Leon
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.